Cryomax+ is the latest slimming system which adopt 4 advanced technology in 1 system: cryolipolysis, cavitation, lipo laser and RF energy. It treats all the body fat area in non invasive way, makes your body slimming, shaped smooth effortless and effective.
Cryolipolysis for Fat Freezing
Cryolipolysis works by freezing fat cells to the point of natural elimination. The cold temperature breaks down the fat cells and the body naturally eliminates them. While the fat cells are destroyed, the surrounding skin and structures remain safe and free of injury. If you are struggling with fat bulges or have excess fat despite having followed a diet and exercise plan, you may be a good candidate for Cryolipolysis. The overall goal of the fat freeze procedure is to reduce the volume of the fat bulges resulting in a slimmer and more contoured body figure.
Lipolaser for Fat Melting
Lipolaser utilizing the power of 40mw-100mw diode laser, the most suitable to physical fat reduction, the 650nm diode laser deep blasts excess fat and melted emits low levels of laser energy, which creates a chemical signal in the fat cells, breaking down the stored triglycerides into free fatty acids and glycerol and releasing them though channels in the cell membranes. The fatty acids and glycerol are then transported around the body to the tissues that will use them during metabolism to create energy.
Cavitation for Fat Blast
Cavitation emits a powerful double beam of low-frequency modulated ultrasound waves on a 1 MHz carrier, produce a cavitation effect that damages the adipose cells causing them to gradually break up. The handpiece uses vacuum technology which lifts the adipose tissue on which the ultrasounds will act, preserving the underlying tissues and thus enhancing the effectiveness and safety of the treatment which focuses only on the area involved. The major reduction effect that can be achieved on localized adiposity and cellulite is given by the cavitation phenomenon, provided that the treatment is performed with low-frequency ultrasounds and adequate power
RF for facial rejuvenation and tightening
Use the bipolar and six polar RF technology, with output frequency 5.0 MHz, power 150watts, it transfers most RF energy to your dermis skin, effectively stimulates collagen and elastin production.
Functions
Body shaping and slimming
Fat reduction
Face lift and wrinkle removal
Skin tighten and smooth
Advantages
1. Cryolipolysis, Cavitation, lipolaser, RF 4 slimming technology in 1 machine
2. User-friendly cryolipolysis handpiece design with 7 different size replacement cup to treat body area, the extra chin handpiece is supplied to treat double chin. Contact cooling area updated to 360°full contact, more area can be treatment within 1 session.
3. Focused cavitation for larger fat area treatment and better slimming result
4. Total 8 lipolaser pads cover all body fat area, reduce fat effortless.
5. Different RF handle for face and body tighten.
6. The super cooling system with condenser ensure long continuous working at least 5 hours cryolipolysis treatment.
7. The high efficacy, ease of use, and cutting-edge technology provide a strong ROI on fat removal investment.
Interface
Features
· Immediate results
· Long-lasting results
· Fat reduction
· Visibly improved cellulite
· Comfortable
No surgery
· No downtime
· Non-invasive
· Short treatment times
· No anesthesia
Accessory list
1 x Main Machine
1 x Cavitation Handpiece
5 x Cryolipolysis Handpiece
8 x Lipolaser handle (6 big+2 small)
2 x RF handle
1 x Handpiece Holder
2 x Key
1 x Power Cord
1 x User Manual
1 x Funnel
1 x Vent connect
Parameter
|
Cooling handle size |
Big handpiece 23cm*7cm, 23cm*7cm, 20cm*7cm, 18cm*7cm. Small handpiece 15cm*6cm, 15cm*6cm, 13cm*6cm Chin handpiece 8.5cm*4.3cm |
|
Cooling device output temperature |
0,-5,-10 ℃ |
|
Vacuum pressure |
0-80kpa |
|
Laser wavelength |
Laser diode AlGalnp 635-650nm |
|
Max lipolaser output power |
6000mw |
|
lipolaser power |
100mw/pcs |
|
Number of diode laser |
60 |
|
Cavitation Modulation frequency |
40KHZ |
|
Max Cavitation energy density |
3W/cm2 |
|
RF frequency |
5MHz |
|
RF power |
150W |
|
Cooling system |
Wind+water+semiconductor |
|
Screen |
10.4 inch color touch screen |
|
Voltage |
220V or 110 V, 50/60Hz |
|
Fuse |
220V 3A , or 110V 6A |
|
Machine Power |
3500 W |
|
Package size |
68cm*72cm*111cm+45cm*45cm*55cm |
|
Total Weight |
95kg |
|
Relative Humidity |
≤80% |
|
Atmospheric pressure |
88KPa ～110KPa |
